Bar (unit)
Template:Short description Script error: No such module "other uses". Script error: No such module "redirect hatnote". Script error: No such module "Infobox".Page Template:Infobox/styles-images.css has no content.Script error: No such module "Check for unknown parameters".
The bar (symbol bar) is a metric unit of pressure defined as Script error: No such module "val". (100 kPa or 1000 hPa), though not part of the International System of Units (SI). A pressure of 1 bar is slightly less than the average atmospheric pressure on Earth at sea level (approximately 1.013 bar).[1][2] By the barometric formula, 1 bar is roughly the atmospheric pressure on Earth at an altitude of 111 metres at 15 °C.
The bar and the millibar (symbol mbar) were introduced by the Norwegian meteorologist Vilhelm Bjerknes, a founder of the modern practice of weather forecasting, with the bar defined as one megadyne per square centimetre.[3]
The SI brochure lists the symbol for the bar but does not otherwise mention the unit.[1] The bar has been legally recognised in countries of the European Union since 2004.[2] The US National Institute of Standards and Technology (NIST) deprecates its use except for "limited use in meteorology" and lists it as one of several units that "must not be introduced in fields where they are not presently used".[4] The International Astronomical Union (IAU) also lists it under "Non-SI units and symbols whose continued use is deprecated".[5]
Units derived from the bar include the megabar (symbol: Mbar), kilobar (symbol: kbar), decibar (symbol: dbar), centibar (symbol: cbar), and millibar (symbol: mbar).
Definition and conversion
The bar is defined using the SI derived unit, pascal: Script error: No such module "val". ≡ Script error: No such module "val". ≡ Script error: No such module "val"..
Thus, Script error: No such module "val". is equal to:
- Script error: No such module "val". (barye; in CGS units (this has also been called "bar"[6][7]); and 1 bar is approximately equal to:
- Script error: No such module "convert".
- Script error: No such module "convert".
- Script error: No such module "convert".
- Script error: No such module "convert".
- Script error: No such module "convert".
- Script error: No such module "val". centimetres of water (cmH2O) (1 bar approximately corresponds to the gauge pressure of water at a depth of 10 metres)
1 millibar (mbar) is equal to:
- Script error: No such module "val".
- Script error: No such module "convert".
Origin
The word bar has its origin in the Ancient Greek word Script error: No such module "Lang". (Script error: No such module "lang".), meaning weight. The unit's official symbol is bar;Script error: No such module "Unsubst". the earlier symbol b is deprecated and conflicts with the uses of b denoting the unit barn or bit, but it is still encountered, especially as mb (rather than the proper mbar) to denote the millibar. Between 1793 and 1795, the word bar was used for a unit of mass (equal to the modern tonne) in an early version of the metric system.[8]
Usage


Atmospheric air pressure where standard atmospheric pressure is defined as 1013.25 mbar, 101.325 kPa, Script error: No such module "val"., which is about Script error: No such module "convert".. Despite the millibar not being an SI unit, meteorologists and weather reporters worldwide have long measured air pressure in millibar as the values are convenient. Since the advent of SI units, some meteorologists began using hectopascals (symbol hPa) which are numerically equivalent to millibar; for the same reason, the hectopascal is the standard unit used to express barometric pressures in aviation in most countries. For example, the Meteorological Service of Canada uses kilopascals and hectopascals on their weather maps.[9][10] In contrast, Americans are familiar with the use of the millibar in US reports of hurricanes and other cyclonic storms.[11][12]
In fresh water, there is an approximate numerical equivalence between the change in pressure in decibar and the change in depth from the water surface in metres. Specifically, an increase of 1 decibar occurs for an increase in depth of Script error: No such module "val".. In sea water with respect to the gravity variation, the latitude and the geopotential anomaly the pressure can be converted into metres' depth according to an empirical formula.[13] As a result, decibar is commonly used in oceanography.
In scuba diving, bar is also the most widely used unit to express pressure, e.g. 200 bar being a full standard scuba tank, and depth increments of 10 metre of seawater being equivalent to 1 bar of pressure.
Engineers commonly use the bar as a unit of pressure because using pascals would involve using very large numbers.Script error: No such module "Unsubst". In measurement of vacuum and in vacuum engineering, residual pressures are typically given in millibar, although torr or millimetre of mercury (mmHg) were historically common.Script error: No such module "Unsubst".
Pressures resulting from deflagrations are often expressed in units of bar.[14]
In the automotive field, turbocharger boost is often described in bar outside the United States. Tire pressure is often specified in bar. In hydraulic machinery components are rated to the maximum system oil pressure, which is typically in hundreds of bar. For example, 300 bar is common for industrial fixed machinery.
In the maritime ship industries, pressures in piping systems, such as cooling water systems, is often measured in bar.
Unicode has characters for "mb" (Expression error: Unexpected < operatorScript error: No such module "Check for unknown parameters".), "bar" (Expression error: Unexpected < operatorScript error: No such module "Check for unknown parameters".) and Script error: No such module "Lang". (Expression error: Unexpected < operatorScript error: No such module "Check for unknown parameters".; "millibar" spelt in katakana), but they exist only for compatibility with legacy Asian encodings and are not intended to be used in new documents.
The kilobar, equivalent to 100 MPa, is commonly used in geological systems, particularly in experimental petrology.
The abbreviations "bar(a)" and "bara" are sometimes used to indicate absolute pressures, and "bar(g)" and "barg" for gauge pressures. The usage is deprecated but still prevails in the oil industry (often by capitalized "BarG" and "BarA"). As gauge pressure is relative to the current ambient pressure, which may vary in absolute terms by about 50 mbar, "BarG" and "BarA" are not interconvertible. Fuller descriptions such as "gauge pressure of 2 bars" or "2-bar gauge" are recommended.[2][15]
See also
- Centimetre or millimetre of water
- Script error: No such module "Section link".
- List of metric units
- Metric prefix
- Script error: No such module "Section link".
References
- This article incorporates material from the Citizendium article "Bar (unit)", which is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License but not under the GFDL.
Page Template:Reflist/styles.css has no content.
- ↑ a b Template:SIbrochure9th.
- ↑ a b c British Standard BS 350:2004 Conversion Factors for Units.
- ↑ Script error: No such module "citation/CS1".
- ↑ NIST Special Publication 1038 Script error: No such module "webarchive"., Sec. 4.3.2; NIST Special Publication 811, 2008 edition Script error: No such module "webarchive"., Sec. 5.2
- ↑ International Astronomical Union Style Manual. Comm. 5 in IAU Transactions XXB, 1989, Table 6
- ↑ Script error: No such module "Citation/CS1".
- ↑ Script error: No such module "Citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ US government atmospheric pressure map
- ↑ The Weather Channel
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
Script error: No such module "Check for unknown parameters".