Provider edge router
From Wikipedia, the free encyclopedia
(Redirected from Provider edge)
Template:Short description Template:MPLS diagram
A provider edge router (PE router) is a router between one network service provider's area and areas administered by other network providers.[1] A network provider is usually an Internet service provider as well (or only that).
The term PE router covers equipment capable of a broad range of routing protocols, notably:
- Border Gateway Protocol (BGP) (PE to PE or PE to CE communication)
- Open Shortest Path First (OSPF) (PE to CE router communication)
- Multiprotocol Label Switching (MPLS) (CE to PE (ingress eLSR) or PE to CE (egress eLSR),[2][3] also PE to P (and visa versa))
PE routers do not need to be aware of what kind of traffic is coming from the provider's network, as opposed to a P router that functions as a transit within the service provider's network. However, some PE routers also do labelling.
See also
References
Page Template:Reflist/styles.css has no content.
- ^ Page Module:Citation/CS1/styles.css has no content."BGP/MPLS IP Virtual Private Networks (VPNs)". IETF Tools. IETF. Retrieved 2019-11-13.
- ^ Page Module:Citation/CS1/styles.css has no content."A Network Administrator's View of Multiservice Networks". Cisco Press. 9 December 2005.
- ^ Page Module:Citation/CS1/styles.css has no content."MPLS VPN Carrier Supporting Carrier Using LDP and an IGP". 4 April 2014.
