Moraine
Template:Short description Script error: No such module "about". Script error: No such module "Distinguish".
A moraine is any accumulation of unconsolidated debris (regolith and rock), sometimes referred to as glacial till, that occurs in both currently and formerly glaciated regions and that has been previously carried along by a glacier or ice sheet. It may consist of partly rounded particles ranging in size from boulders (in which case it is often referred to as boulder clay) down to gravel and sand, in a groundmass of finely divided clayey material sometimes called glacial flour. Lateral moraines are those formed at the side of the ice flow, and terminal moraines are those formed at the foot, marking the maximum advance of the glacier. Other types include ground moraines (till-covered areas forming sheets on flat or irregular topography) and medial moraines (formed where two glaciers meet).
Etymology
The word moraine is borrowed from French Script error: No such module "Lang". Script error: No such module "IPA"., which in turn is derived from the Savoyard Italian Script error: No such module "Lang". ('mound of earth'). Script error: No such module "Lang". in this case was derived from Provençal Script error: No such module "Lang". ('snout'), itself from Vulgar Latin Script error: No such module "Lang". ('rounded object').[1] The term was introduced into geology by Horace Bénédict de Saussure in 1779.[2]
Characteristics
Moraines are landforms composed of glacial till deposited primarily by glacial ice.[2] Glacial till is unstratified and unsorted debris ranging in size from silt-sized glacial flour to large boulders.Lua error in package.lua at line 80: module 'Module:Footnotes/anchor_id_list' not found. The individual rock fragments are typically sub-angular to rounded in shape.[3] Moraines may be found on the glacier's surface or deposited as piles or sheets of debris where the glacier has melted.Lua error in package.lua at line 80: module 'Module:Footnotes/anchor_id_list' not found.
Formation
Moraines may form through a number of processes depending on the characteristics of sediment, the dynamics on the ice, and the location on the glacier in which the moraine is formed.[4] Moraine forming processes may be loosely divided into passive and active.[5]
Passive processes involve the placing of chaotic supraglacial sediments onto the landscape with limited reworking, typically forming hummocky moraines.[6][7] These moraines are composed of supraglacial sediments from the ice surface.[5]
Active processes form or rework moraine sediment directly by the movement of ice, known as glaciotectonism. These form push moraines and thrust-block moraines, which are often composed of till and reworked proglacial sediment.[8]
Moraine may also form by the accumulation of sand and gravel deposits from glacial streams emanating from the ice margin. These fan deposits may coalesce to form a long moraine bank marking the ice margin.[9] Several processes may combine to form and rework a single moraine, and most moraines record a continuum of processes. Reworking of moraines may lead to the formation of placer deposits of gold as is the case of southernmost Chile.[10]
-
Moraine in Rocky Mountain National Park, taken by Ansel Adams in 1941.
-
Lateral moraines of a retreating glacier in Engadin.
-
Moraine of Lake Garda in Italy.
Types
Script error: No such module "Labelled list hatnote".Moraines can be classified either by origin, location with respect to a glacier or former glacier, or by shape.[11] The first approach is suitable for moraines associated with contemporary glaciers—but more difficult to apply to old moraines, which are defined by their particular morphology, since their origin is debated. Some moraine types are known only from ancient glaciers, while medial moraines of valley glaciers are poorly preserved and difficult to distinguish after the retreat or melting of the glacier.[<span title="Script error: No such module "decodeEncode".">citation needed]
Lateral moraine
Lateral moraines are parallel ridges of debris deposited along the sides of a glacier. The unconsolidated debris can be deposited on top of the glacier by frost shattering of the valley walls or from tributary streams flowing into the valley,[12] or may be subglacial debris carried to the surface of the glacier, melted out, and transported to the glacier margin.[13]
Lateral moraines can rise up to 140 meters (460 ft) over the valley floor, can be up to three kilometers (2 mi) long, and are steeper close to the glacier margin (up to 80 degrees) than further away (where slopes are typically 29 to 36 degrees).[13]
Ground moraine
Ground moraines are till-covered areas with irregular topography and no ridges, often forming gently rolling hills or plains,Lua error in package.lua at line 80: module 'Module:Footnotes/anchor_id_list' not found. with relief of less than 10 meters (33 ft). Ground moraine is accumulated at the base of the ice as lodgment till with a thin and discontinuous upper layer of supraglacial till deposited as the glacier retreats. It typically is found in the areas between end moraines.[14]
Rogen moraine
Rogen moraines or ribbed moraines are a type of basal moraines that form a series of ribs perpendicular to the ice flow in an ice sheet. The depressions between the ribs are sometimes filled with water, making the Rogen moraines look like tiger stripes on aerial photographs. Rogen moraines are named after Lake Rogen[15] in Härjedalen, Sweden, the landform's type locality.
de Geer moraine
Closely related to Rogen moraines, de Geer moraines are till ridges up to 5 m high and 10–50 m wide running perpendicular to the ice flow. They occur in large groups in low-lying areas.[16] Named for Gerard De Geer who first described them in 1889, these moraines may have developed from crevasses underneath the ice sheet.[16] The Kvarken has a high density of de Geer moraines.[17]
End or terminal moraine
End moraines, or terminal moraines, are ridges of unconsolidated debris deposited at the snout or end of the glacier. They usually reflect the shape of the glacier's terminus. Glaciers act much like a conveyor belt, carrying debris from the top of the glacier to the bottom where it deposits it in end moraines. End moraine size and shape are determined by whether the glacier is advancing, receding or at equilibrium. The longer the terminus of the glacier stays in one place, the more debris accumulate in the moraine. There are two types of end moraines: terminal and recessional. Terminal moraines mark the maximum advance of the glacier. Recessional moraines are small ridges left as a glacier pauses during its retreat. After a glacier retreats, the end moraine may be destroyed by postglacial erosion.[18]
Recessional moraine
Recessional moraines are often observed as a series of transverse ridges running across a valley behind a terminal moraine. They form perpendicular to the lateral moraines that they reside between and are composed of unconsolidated debris deposited by the glacier. They are created during temporary halts in a glacier's retreat.[4][19]
Arctic push moraine
In permafrost areas an advancing glacier may push up thick layers of frozen sediments at its front. An arctic push moraine will then be formed.
Medial moraine
A medial moraine is a ridge of moraine that runs down the center of a valley floor. It forms when two glaciers meet and the debris on the edges of the adjacent valley sides join and are carried on top of the enlarged glacier. As the glacier melts or retreats, the debris is deposited and a ridge down the middle of the valley floor is created. The Kaskawulsh Glacier in the Kluane National Park, Yukon, has a ridge of medial moraine 1 km wide.[20]
Script error: No such module "wide image".
Supraglacial moraine
Supraglacial moraines are created by debris accumulated on top of glacial ice. This debris can accumulate due to ice flow toward the surface in the ablation zone,[21] melting of surface ice[22] or from debris that falls onto the glacier from valley sidewalls.[23]
Washboard moraine
Washboard moraines, also known as minor or corrugated moraines, are low-amplitude geomorphic features caused by glaciers. They consist of low-relief ridges, 1 to 2 meters (3 ft 3 in to 6 ft 7 in) in height and around 100 meters (330 ft) apart, accumulated at the base of the ice as lodgment till.[24] The name refers to the fact that from the air it resembles a washboard.
Veiki moraine
A Veiki moraine is a kind of hummocky moraine that forms irregular landscapes of ponds and plateaus surrounded by banks. It forms from the irregular melting of ice covered with a thick layer of debris. Veiki moraine is common in northern Sweden and parts of Canada.
See also
- Geologic features related to moraines
- Examples
References
Page Template:Reflist/styles.css has no content.
- ^ Template:Oed
- ^ a b Page Module:Citation/CS1/styles.css has no content.Jackson, Julia A., ed. (1997). "moraine [glac geol]". Glossary of geology (Fourth ed.). Alexandria, Virginia: American Geological Institute. ISBN 0922152349.
- ^ Page Module:Citation/CS1/styles.css has no content.Boggs, Sam (2006). Principles of sedimentology and stratigraphy (4th ed.). Upper Saddle River, N.J.: Pearson Prentice Hall. p. 281. ISBN 0131547283.
- ^ a b Page Module:Citation/CS1/styles.css has no content.Benn, Douglas I.; Evans, David J.A. (2010). Glaciers & glaciation (Second ed.). London: Routledge. ISBN 978-0340905791.
- ^ a b Page Module:Citation/CS1/styles.css has no content.Möller, Per (December 2010). "Melt-out till and ribbed moraine formation, a case study from south Sweden". Sedimentary Geology. 232 (3–4): 161–180. Bibcode:2010SedG..232..161M. doi:10.1016/j.sedgeo.2009.11.003.
- ^ Page Module:Citation/CS1/styles.css has no content.Kjær, Kurt H.; Krüger, Johannes (2001-10-21). "The final phase of dead-ice moraine development: processes and sediment architecture, Kötlujökull, Iceland". Sedimentology. 48 (5): 935–952. Bibcode:2001Sedim..48..935K. doi:10.1046/j.1365-3091.2001.00402.x. ISSN 1365-3091. S2CID 129374153.
- ^ Page Module:Citation/CS1/styles.css has no content.Janowski, Lukasz; Tylmann, Karol; Trzcinska, Karolina; Rudowski, Stanislaw; Tegowski, Jaroslaw (2021). "Exploration of Glacial Landforms by Object-Based Image Analysis and Spectral Parameters of Digital Elevation Model". IEEE Transactions on Geoscience and Remote Sensing. 60: 1–17. doi:10.1109/TGRS.2021.3091771. ISSN 0196-2892.
- ^ Page Module:Citation/CS1/styles.css has no content.Bennett, Matthew R. (2001-04-01). "The morphology, structural evolution and significance of push moraines". Earth-Science Reviews. 53 (3–4): 197–236. Bibcode:2001ESRv...53..197B. doi:10.1016/S0012-8252(00)00039-8.
- ^ Page Module:Citation/CS1/styles.css has no content.Boulton, G. S. (1986-10-01). "Push-moraines and glacier-contact fans in marine and terrestrial environments". Sedimentology. 33 (5): 677–698. Bibcode:1986Sedim..33..677B. doi:10.1111/j.1365-3091.1986.tb01969.x. ISSN 1365-3091.
- ^ Page Module:Citation/CS1/styles.css has no content.García, Marcelo; Correa, Jorge; Maksaev, Víctor; Townley, Brian (2020). "Potential mineral resources of the Chilean offshore: an overview". Andean Geology. 47 (1): 1–13. Bibcode:2020AndGe..47....1G. doi:10.5027/andgeoV47n1-3260.
- ^ Page Module:Citation/CS1/styles.css has no content.Dreimanis, Aleksis (1989). "Tills: Their genetic terminology and classification". In Goldthwait; Matsch (eds.). Genetic classification of glacigenic deposits : final report of the Commission on Genesis and Lithology of Glacial Quaternary Deposits of the International Union for Quaternary Research (INQUA). Rotterdam: Balkema. pp. 17–83. ISBN 9061916941.
- ^ Page Module:Citation/CS1/styles.css has no content."Lateral Moraine". National Geographic Encyclopedia. May 5, 2011. Retrieved June 18, 2020.
- ^ a b Page Module:Citation/CS1/styles.css has no content.Lukas, Sven; Graf, Andreas; Coray, Sandro; Schlüchter, Christian (March 2012). "Genesis, stability and preservation potential of large lateral moraines of Alpine valley glaciers – towards a unifying theory based on Findelengletscher, Switzerland". Quaternary Science Reviews. 38: 27–48. Bibcode:2012QSRv...38...27L. doi:10.1016/j.quascirev.2012.01.022.
- ^ Page Module:Citation/CS1/styles.css has no content.Hilt Johnson, W.; Menzies, John (2002). "Supraglacial and ice-marginal deposits and landforms". Modern and Past Glacial Environments: 317–333. doi:10.1016/B978-075064226-2/50013-1. ISBN 9780750642262.
- ^ Möller, P., 2006. Rogen moraine: an example of glacial reshaping of preexisting landforms. Quaternary Science Reviews, 25:362–389
- ^ a b Page Module:Citation/CS1/styles.css has no content.Metsähallitus (Forest and Park Services) (16 July 2006). The Kvarken Archipelago (PDF) (Report). Retrieved 3 October 2021.
- ^ Page Module:Citation/CS1/styles.css has no content.Kotilainen, Aarno T.; Kaskela, Anu M.; Bäck, Saara; Leinikki, Jouni (2012). "Submarine De Geer Moraines in the Kvarken Archipelago, the Baltic Sea". Seafloor Geomorphology as Benthic Habitat: 289–298. doi:10.1016/B978-0-12-385140-6.00017-7. ISBN 9780123851406.
- ^ Page Module:Citation/CS1/styles.css has no content.H.-E. Reineck; I. B. Singh (6 December 2012). Depositional Sedimentary Environments: With Reference to Terrigenous Clastics. Springer Science & Business Media. pp. 170–. ISBN 978-3-642-96291-2.
- ^ "Moraine". Columbia Electronic Encyclopedia, 6th Edition (2009): 1. Academic Search Complete. EBSCO. Web. 6 Oct. 2010.
- ^ Page Module:Citation/CS1/styles.css has no content.Loomis, S.R. (1970). "Morphology and structure of an ice-cored medial moraine, Kaskawulsh Glacier, Yukon". Arctic Institute of North America Research Paper. 57: 1–65.
- ^ Page Module:Citation/CS1/styles.css has no content.Boulton, G. S. (1967). "The Development of a Complex Supraglacial Moraine at the Margin of Sørbreen, Ny Friesland, Vestspitsbergen". Journal of Glaciology. 6 (47): 717–735. doi:10.3189/S0022143000019961. S2CID 127729549.
- ^ Page Module:Citation/CS1/styles.css has no content.Fyffe, Catriona L.; Woodget, Amy S.; Kirkbride, Martin P.; Deline, Philip; Westoby, Matthew J.; Brock, Ben W. (August 2020). "Processes at the margins of supraglacial debris cover: Quantifying dirty ice ablation and debris redistribution". Earth Surface Processes and Landforms. 45 (10): 2272–2290. Bibcode:2020ESPL...45.2272F. doi:10.1002/esp.4879. S2CID 218998898.
- ^ Page Module:Citation/CS1/styles.css has no content.Nakawo, M.; Iwata, S.; Watanabe, O.; Yoshida, M. (1986). "Processes which Distribute Supraglacial Debris on the Khumbu Glacier, Nepal Himalaya". Annals of Glaciology. 8: 129–131. Bibcode:1986AnGla...8..129N. doi:10.3189/S0260305500001294. S2CID 246062157.
- ^ Page Module:Citation/CS1/styles.css has no content.Stewart, Robert A.; Bryant, Deborah; Sweat, Michael J. (March 1988). "Nature and origin of corrugated ground moraine of the Des Moines lobe, Story County, Iowa". Geomorphology. 1 (2): 111–130. Bibcode:1988Geomo...1..111S. doi:10.1016/0169-555X(88)90010-4.
Page Template:Refbegin/styles.css has no content.
Further reading
- Page Module:Citation/CS1/styles.css has no content.Easterbrook, D. J. (1999), Surface processes and landforms (Second ed.), Upper Saddle River, N.J.: Prentice Hall, ISBN 9780138609580
External links
Page Module:Side box/styles.css has no content.Page Template:Sister project/styles.css has no content.
Page Module:Side box/styles.css has no content.Page Template:Sister project/styles.css has no content.
- "Glacial moraines unmistakable vestige of last ice age" – Pantagraph (Bloomington, Illinois newspaper)
Lua error in package.lua at line 80: module 'Module:Navbox/configuration' not found. Lua error in package.lua at line 80: module 'Module:Navbox/configuration' not found. Lua error in package.lua at line 80: module 'Module:Authority control/config' not found.