866A
Page Module:Message box/ambox.css has no content.
This article relies largely or entirely on a single source. (August 2023) |
Page Module:Infobox/styles.css has no content.
| 866A | |
|---|---|
| Lua error in package.lua at line 80: module 'Module:InfoboxImage/data' not found. Westinghouse 866A mercury vapor half-wave rectifier tube. | |
| Classification | Diode |
| Cathode | |
| Cathode type | Directly heated |
| Heater voltage | 2.5 V |
| Heater current | 5 A |
| Anode | |
| Max voltage | 5000 |
| Max current | 250 mA |
| References | |
| RCA Transmitting Tube Manual TT-3, 1940 | |
The 866 is a mercury vapor half-wave rectifier intended for high-voltage applications. The voltage drop is approximately 15 volts up to 150 Hz. To avoid unwanted shorts the tube must be operated in a vertical position and the filament preheated for at least 30 seconds before applying the plate voltage.[1]
Construction
Structurally, it consists of a linear electrode arrangement; a cup shaped anode with top cap and a cylindrical cathode. The socket is a medium 4 pin bayonet UX-4 and the glass envelope is ST-19. The 2.5 volt/ 5 Amp filament is connected to pins 1 and 4.
Operation
Under normal operating conditions the tube glows blue and mercury droplets are visible.
Pictures in working conditions
Lua error in package.lua at line 80: module 'Module:Plain text' not found.
References
- ^ Page Module:Citation/CS1/styles.css has no content."866". www.uli.de.
Further reading
- Page Module:Citation/CS1/styles.css has no content.RCA Transmitting Tube Manual TT-3. Radio Corporation of America. 1940. pp. 64–65.
