Bioenergy

File:Metz biomass power station.jpg

A CHP power station using wood to supply 30,000 households in France with bioenergy as a renewable energy source

File:Faz S Sofia canavial 090607 REFON.JPG

Sugarcane plantation to produce ethanol for bioenergy production in Brazil

Bioenergy is a type of renewable energy that is derived from plants and animals. The biomass that is used as input materials consists of recently living (but now dead) organisms, mainly plants. Thus, fossil fuels are not regarded as biomass under this definition. Types of biomass commonly used for bioenergy include wood, food crops such as corn, energy crops and waste from forests, yards, or farms. Bioenergy can also refer to electricity generated from the photosynthesis of living organisms, typically using microbial fuel cells and biological photovoltaics.

Bioenergy can help with climate change mitigation but in some cases the required biomass production can increase greenhouse gas emissions or lead to local biodiversity loss. The environmental impacts of biomass production can be problematic, depending on how the biomass is produced and harvested. But it still produces CO₂; so long as the energy is derived from breaking chemical bonds.

The IEA's Net Zero by 2050 scenario calls for traditional bioenergy to be phased out by 2030, with modern bioenergy's share increasing from 6.6% in 2020 to 13.1% in 2030 and 18.7% in 2050. Bioenergy has a significant climate change mitigation potential if implemented correctly.Template:Rp Most of the recommended pathways to limit global warming include substantial contributions from bioenergy in 2050 (average at 200 EJ).Template:Rp

Definition and terminology

The IPCC Sixth Assessment Report defines bioenergy as "energy derived from any form of biomass or its metabolic by-products".Template:Rp It goes on to define biomass in this context as "organic material excluding the material that is fossilised or embedded in geological formations".Template:Rp This means that coal or other fossil fuels is not a form of biomass in this context.

The term traditional biomass for bioenergy means "the combustion of wood, charcoal, agricultural residues and/or animal dung for cooking or heating in open fires or in inefficient stoves as is common in low-income countries".Template:Rp

Since biomass can also be used as a fuel directly (e.g. wood logs), the terms biomass and biofuel have sometimes been used interchangeably. However, the term biomass usually denotes the biological raw material the fuel is made of. The terms biofuel or biogas are generally reserved for liquid or gaseous fuels respectively.

Input materials

File:Steven's Croft Biomass Plant - geograph.org.uk - 800207.jpg

Biomass plant in Scotland.

File:Trends in consumption of bioenergy, 2010–2023.svg

Changes in consumption of bioenergy by type, 2010–2023.

Wood and wood residues is the largest biomass energy source today. Wood can be used as a fuel directly or processed into pellet fuel or other forms of fuels. Other plants can also be used as fuel, for instance maize, switchgrass, miscanthus and bamboo. The main waste feedstocks are wood waste, agricultural waste, municipal solid waste, and manufacturing waste. Upgrading raw biomass to higher grade fuels can be achieved by different methods, broadly classified as thermal, chemical, or biochemical:

Thermal conversion processes use heat as the dominant mechanism to upgrade biomass into a better and more practical fuel. The basic alternatives are torrefaction, pyrolysis, and gasification, these are separated mainly by the extent to which the chemical reactions involved are allowed to proceed (mainly controlled by the availability of oxygen and conversion temperature).

Many chemical conversions are based on established coal-based processes, such as the Fischer-Tropsch synthesis. Like coal, biomass can be converted into multiple commodity chemicals.

Biochemical processes have developed in nature to break down the molecules of which biomass is composed, and many of these can be harnessed. In most cases, microorganisms are used to perform the conversion. The processes are called anaerobic digestion, fermentation, and composting.

Applications

Biofuel for transportation

Template:Main articleBased on the source of biomass, biofuels are classified broadly into two major categories, depending if food crops are used or not:

First-generation (or "conventional") biofuels are made from food sources grown on arable lands, such as sugarcane and maize. Sugars present in this biomass are fermented to produce bioethanol, an alcohol fuel which serves as an additive to gasoline, or in a fuel cell to produce electricity. Bioethanol is made by fermentation, mostly from carbohydrates produced in sugar or starch crops such as corn, sugarcane, or sweet sorghum. Bioethanol is widely used in the United States and in Brazil. Biodiesel is produced from the oils in for instance rapeseed or sugar beets and is the most common biofuel in Europe.

Second-generation biofuels (also called "advanced biofuels") utilize non-food-based biomass sources such as perennial energy crops and agricultural residues/waste. The feedstock used to make the fuels either grow on arable land but are byproducts of the main crop, or they are grown on marginal land. Waste from industry, agriculture, forestry and households can also be used for second-generation biofuels, using e.g. anaerobic digestion to produce biogas, gasification to produce syngas or by direct combustion. Cellulosic biomass, derived from non-food sources, such as trees and grasses, is being developed as a feedstock for ethanol production, and biodiesel can be produced from left-over food products like vegetable oils and animal fats.

Production of liquid fuels

• Biomass to liquid

• Bioconversion of biomass to mixed alcohol fuels

Comparison with other renewable energy types

File:Eucalyptus plantation, Kodaikanal.jpg

Eucalyptus plantation in India.

Land requirement

The surface power production densities of a crop will determine how much land is required for production. The average lifecycle surface power densities for biomass, wind, hydro and solar power production are 0.30 W/m², 1 W/m², 3 W/m² and 5 W/m², respectively (power in the form of heat for biomass, and electricity for wind, hydro and solar). Lifecycle surface power density includes land used by all supporting infrastructure, manufacturing, mining/harvesting and decommissioning.

Another estimate puts the values at 0.08 W/m² for biomass, 0.14 W/m² for hydro, 1.84 W/m² for wind, and 6.63 W/m² for solar (median values, with none of the renewable sources exceeding 10 W/m²).

Related technologies

Bioenergy with carbon capture and storage (BECCS)

Carbon capture and storage technology can be used to capture emissions from bioenergy power plants. This process is known as bioenergy with carbon capture and storage (BECCS) and can result in net carbon dioxide removal from the atmosphere. However, BECCS can also result in net positive emissions depending on how the biomass material is grown, harvested, and transported. Deployment of BECCS at scales described in some climate change mitigation pathways would require converting large amounts of cropland.Template:Excerpt

Climate and sustainability aspects

File:Bioenergy system boundaries.jpg

Alternative system boundaries for assessing climate effects of forest-based bioenergy. Option 1 (black) considers only the stack emissions; Option 2 (green) considers only the forest carbon stock; Option 3 (blue) considers the bioenergy supply chain; Option 4 (red) covers the whole bioeconomy, including wood products in addition to biomass.

Environmental impacts

Bioenergy can either mitigate (i.e. reduce) or increase greenhouse gas emissions. Local environmental impacts can be problematic. For example, forests are sometimes cleared for the production of sugarcane-derived bioethanol, like in the case of a large-scale project in Indonesia in 2025.

Biomass production can create significant social and environmental pressure in the locations where the biomass is produced. The impact is primarily related to the low surface power density of biomass. The low surface power density has the effect that much larger land areas are needed in order to produce the same amount of energy, compared to for instance fossil fuels.

Long-distance transport of biomass have been criticised as wasteful and unsustainable, and there have been protests against forest biomass export in Sweden and Canada.

Scale and future trends

In 2020 bioenergy produced 58 EJ (exajoules) of energy, compared to 172 EJ from crude oil, 157 EJ from coal, 138 EJ from natural gas, 29 EJ from nuclear, 16 EJ from hydro and 15 EJ from wind, solar and geothermal combined. Most of the global bioenergy is produced from forest resources.Template:RpTemplate:Rp

Generally, bioenergy expansion fell by 50% in 2020. China and Europe are the only two regions that reported significant expansion in 2020, adding 2 GW and 1.2 GW of bioenergy capacity, respectively.

Almost all available sawmill residue is already being utilized for pellet production, so there is no room for expansion. For the bioenergy sector to significantly expand in the future, more of the harvested pulpwood must go to pellet mills. However, the harvest of pulpwood (tree thinnings) removes the possibility for these trees to grow old and therefore maximize their carbon holding capacity.Template:Rp Compared to pulpwood, sawmill residues have lower net emissions: "Some types of biomass feedstock can be carbon-neutral, at least over a period of a few years, including in particular sawmill residues. These are wastes from other forest operations that imply no additional harvesting, and if otherwise burnt as waste or left to rot would release carbon to the atmosphere in any case."Template:Rp

See also

• Biochar
• Biomass to liquid
• Biorefinery
• European Biomass Association
• Indirect land use change impacts of biofuels

References

Sources

• Pishvaee, Mir Saman; Mohseni, Shayan; Bairamzadeh, Samira (2021). "An overview of biomass feedstocks for biofuel production". Biomass to Biofuel Supply Chain Design and Planning Under Uncertainty. Elsevier. doi:10.1016/b978-0-12-820640-9.00001-5. ISBN 978-0-12-820640-9. S2CID 230567249.
• Akhtar, Ali; Krepl, Vladimir; Ivanova, Tatiana (2018-07-05). "A Combined Overview of Combustion, Pyrolysis, and Gasification of Biomass". Energy & Fuels. 32 (7). American Chemical Society (ACS): 7294–7318. Bibcode:2018EnFue..32.7294A. doi:10.1021/acs.energyfuels.8b01678. ISSN 0887-0624. S2CID 105089787.
• Liu, Guangjian; Larson, Eric D.; Williams, Robert H.; Kreutz, Thomas G.; Guo, Xiangbo (2011-01-20). "Making Fischer−Tropsch Fuels and Electricity from Coal and Biomass: Performance and Cost Analysis". Energy & Fuels. 25 (1). American Chemical Society (ACS): 415–437. Bibcode:2011EnFue..25..415L. doi:10.1021/ef101184e. ISSN 0887-0624.
• National Academies of Sciences, Engineering, and Medicine (2019). Negative Emissions Technologies and Reliable Sequestration: A Research Agenda. doi:10.17226/25259. ISBN 978-0-309-48452-7. PMID 31120708. S2CID 134196575. Archived from the original on 25 May 2020.
• Climate Central (2015-10-23). "Pulp Fiction, The Series". Retrieved 2022-02-12.
• IFL Science (2016-03-14). "British Power Stations Are Burning Wood From US Forests – To Meet Renewables Target". IFLScience. Archived from the original on 2022-03-31. Retrieved 2023-01-10.
• Forest Defenders Alliance (2021). "Standing up for forests and against the Swedish forestry model: A letter to EC policymakers".
• STAND.earth (2021-03-23). "Risk Map: Primary forest and threatened caribou habitat overlap with preliminary estimated wood pellet haul zones for Pinnacle/Drax in British Columbia".
• Tester, Jefferson W.; Drake, Elisabeth M.; Driscoll, Michael J.; Golay, Michael W.; Peters, William A. (2012). Sustainable Energy: Choosing Among Options. MIT Press. ISBN 978-0-262-01747-3. OCLC 892554374.
• Smil, Vaclav (2017a). Energy Transitions: Global and National Perspectives. Praeger Publishing. ISBN 978-1-4408-5324-1. OCLC 955778608.
• Smil, Vaclav (2015). Power density : a key to understanding energy sources and uses. Cambridge, Massachusetts: MIT Press. pp. 26–27, 211, box 7.1. ISBN 978-0-262-32692-6. OCLC 927400712.
• IPCC (2014). Edenhofer, O.; Pichs-Madruga, R.; Sokona, Y.; Farahani, E.; et al. (eds.). Climate Change 2014: Mitigation of Climate Change: Working Group III contribution to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change. Cambridge University Press. ISBN 978-1-107-05821-7. OCLC 892580682. Archived from the original on 26 January 2017.
• World Health Organization (2016). Burning Opportunity: Clean Household Energy for Health, Sustainable Development, and Wellbeing of Women and Children (PDF). ISBN 978-92-4-156523-3. Archived (PDF) from the original on 13 June 2021.