GWR 6800 Class

Great Western Railway 6800 Class
6877 Llanfair Grange at Exeter St Davids in 1958
Type and origin Power type Steam Designer Charles Collett Builder Great Western Railway Swindon Works Order number Lot 308 Build date 1936–1939, 2024 Total produced 80
Specifications Configuration: ​  • Whyte 4-6-0  • UIC 2′C h2 Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Leading dia. 3 ft 0 in (0.914 m) Driver dia. 5 ft 8 in (1.727 m) Minimum curve 8 chains (530 ft; 160 m) normal, 7 chains (460 ft; 140 m) slow Length 63 ft 0+1⁄4 in (19.21 m) Width 8 ft 11+1⁄4 in (2.724 m) Height 13 ft 0 in (3.962 m) Axle load 18 long tons 8 cwt (41,200 lb or 18.7 t) (20.6 short tons) Adhesive weight 55 long tons 2 cwt (123,400 lb or 56 t) (61.7 short tons) Loco weight 74 long tons 0 cwt (165,800 lb or 75.2 t) (82.9 short tons) full Fuel type Coal Fuel capacity 7 long tons 0 cwt (15,700 lb or 7.1 t) (7.8 short tons) Water cap. 3,500 imp gal (16,000 L; 4,200 US gal) Firebox: ​  • Grate area 27.07 sq ft (2.515 m2) Boiler GWR Standard No. 1 Boiler pressure 225 psi (1.55 MPa) Heating surface: ​  • Firebox 154.78 sq ft (14.380 m2)  • Tubes and flues 1,686.60 sq ft (156.690 m2) Superheater: ​  • Heating area 4-element: 191.8 sq ft (17.82 m2), 6-element: 253.38 sq ft (23.540 m2) Cylinders Two, outside Cylinder size 18.5 in × 30 in (470 mm × 762 mm)
Performance figures Tractive effort 28,875 lbf (128.44 kN)
Career Operators Great Western Railway, British Railways Power class GWR: D; BR: 5MT Numbers 6800–6879 Axle load class GWR: Red First run 1936 Retired 1960–1965 Disposition All original locomotives scrapped, GWR 6880 Betton Grange Operational

The Great Western Railway (GWR) 6800 Class or Grange Class is a mixed-traffic class of 4-6-0 steam locomotive, built to replace the GWR 4300 Class 2-6-0. There were 80 originally built in the class, all built at the Swindon works, using some reconditioned parts from withdrawn 4300 Class locomotives. The 81st Grange, 6880 Betton Grange, was completed in 2024 as new member of the class.

Background

The GWR locomotive standardisation policy pursued by George Jackson Churchward envisaged a range of locomotive classes which would be suitable for the majority of duties, and yet which would share a small number of standard components. Among the designs suggested in 1901 was a 4-6-0 with 5-foot-8-inch (1.727 m) diameter driving wheels and the Standard No. 1 boiler. Although planned in 1901, none were built during Churchward's lifetime. C.B. Collett, (Churchward's successor at Swindon Works) rather introduced the Hall class with 6-foot (1.829 m) diameter driving wheels.

The 4300 Class of 2-6-0 tender locomotives had been introduced on the GWR for mixed traffic duties in 1911, and by 1932 there were 342 in service. However, by the mid-1930s some of the earlier examples were in need of attention and the class as a whole was struggling with some of the duties expected of them. Collett therefore revived the Churchward proposal, but modified the design to include a cab and controls to the current style. Between 1936 and 1939, one hundred 4300 Class were taken out of service and replaced by new 4-6-0 locomotives; eighty were of the 6800 (or Grange) class and the remaining 20 were of the 7800 (or Manor) class. It had been intended to replace all of the 4300 Class in this way, but the Second World War stopped the programme.

Design and Production

The Granges were effectively a smaller-wheeled version of the Hall Class.

The wheels, valve motion and tenders were taken from the withdrawn engines, reconditioned and then used in the construction of the 100 new locomotives; the components from one old locomotive were spread amongst more than one of the new engines. The cylinders of the Granges were of the same size as those used on the 4300 Class, but the old cylinders could not be re-used because the cylinders and valves shared a common casting, and the new design called for the separation between cylinder and valve centre lines to be increased by 2+1⁄2 inches (64 mm). This was done in order to make the cylinders level with the axles, but still allow the use of the old valve motion parts.

The locomotives were built in two batches to a single order (Lot No. 308): Nos. 6800-6859 were built between August 1936 and December 1937, and Nos. 6860-6879 appeared between February and May 1939. They were all named after Granges in the area covered by the GWR. Further construction of the class was cancelled due to the outbreak of war. They were originally fitted with Churchward 3,500 imp gal (16,000 L; 4,200 US gal) tenders taken from withdrawn members of the 4300 Class. However, after the second world war several were fitted with newer 3,500 imp gal (16,000 L; 4,200 US gal) and 4,000 imp gal (18,000 L; 4,800 US gal) types.

Performance

Although built to a thirty five-year-old design, in service they proved to be reliable performers. With their power and mixed traffic characteristics they could handle most duties on the network. Their smaller driving wheels giving them a higher tractive effort than the Hall Class. They were often used for the haulage of perishable goods, such as fruit and broccoli, and for excursion trains. However their axle loading prevented their use on some cross-country routes previously operated by the 4300 class. As a result, a lighter version in the form of the Manor Class was introduced for these duties.

File:Swindon Works 'Grange' 4-6-0 geograph-2920419-by-Ben-Brooksbank.jpg

No. 6827 'Llanfrechfa Grange' at Swindon Works 29 November 1964.

The BR power classification of the Grange class was 5MT, its GWR power class was D and its route availability colour code was red.

Accidents

• On 21 September 1962, 6800 Arlington Grange was hauling a freight train which overran signals at Steventon and was derailed.

Withdrawal and Preservation

The entire class was withdrawn from service between 1960 and 1965 and no examples were preserved. However, GWR 6880 Betton Grange, the next Grange that was due to be built originally, was constructed between approximately 1998 and 2024 at the Llangollen Railway and Tyseley Locomotive Works.

Table of withdrawals

Year	Quantity in service at start of year	Number withdrawn	Quantity withdrawn	Locomotive numbers
1960	80	1	1	6801.
1961	79	2	3	6802/05.
1962	77	1	4	6865.
1963	76	5	9	6807/09/14/28/35.
1964	71	26	35	6800/04/06/08/10–11/18/21–22/24–25/32/34/39/42–46/50/52/63/67/73/75/78.
1965	45	45	80	6803/12–13/15–17/19–20/23/26–27/29–31/33/36–38/40–41/47–49/51/53–62/64/66/68–72/74/76–77/79.

See also

• List of GWR standard classes with two outside cylinders

References

• Bradley, Rodger (1988). GWR Two Cylinder 4-6-0s and 2-6-0s. Newton Abbot: David & Charles. ISBN 0-7153-8894-0.
• Chacksfield, J.E. (2002). C.B. Collett: A Competent Successor. The Oakwood Library of Railway History. Usk: Oakwood Press. ISBN 0-85361-586-1. OL121.
• Gibson, John C. (1984). Great Western Locomotive Design: A Critical Appreciation. Newton Abbot: David & Charles. ISBN 0-7153-8606-9.
• Holcroft, Harold (1971) [1957]. An Outline of Great Western Locomotive Practice 1837-1947 (2nd ed.). Shepperton: Ian Allan. ISBN 0-7110-0228-2.
• le Fleming, H.M. (November 1960) [1953]. White, D.E. (ed.). The Locomotives of the Great Western Railway, part eight: Modern Passenger Classes (2nd ed.). Kenilworth: RCTS. OCLC 500544523.
• Template:RCTS-LocosGWR-9
• Vaughan, Adrian (1983). Signalman's Twilight. London: John Murray. ISBN 0-7195-3973-0.
• Whitehurst, Brian (1973). Great Western Engines, Names, Numbers, Types and Classes (1940 to Preservation). Oxford, UK: Oxford Publishing Company. pp. 60–61, 103, 132. ISBN 978-0-9028-8821-0. OCLC 815661.

External links

• Great Western Railway archive entry on the 6800 class
• Railways on line entry
• Website of the Grange Project